 |
The Atlas Single U-Joint features short, stubby jaws for extra strength and reliability. Each piece is carefully manufactured to precise specifications using only top quality, heat-treated steel. |
 |
 |
 |
NOTE 1:Dimension "B", the diameter of the shaft, should not exceed 55% of joint diameter "A". Reference should always be made to dimension "A", the outside diameter of the joint to indicate desired size when ordering.NOTE 2:1.25" OD joints and smaller do not provide oilers. |
Ordering InformationMaximum Angle is 45¡ except as noted. |
A |
DStandardLength |
DShortLength |
C |
Weightlbs.(each) |
| 3/4" | 2 3/4" | n/a | 7/8" | .20 |
| 7/8" | 3" | 2 1/4" | 1" | .34 |
| 1" | 3 3/8" | 3" | 1" | .61 |
| 1 1/8" | 3 5/8" | 3" | 1 1/8" | .82 |
| 1 1/4" | 3 3/4" | 2 7/8" | 1 1/8" | 1.14 |
| 1 1/2" | 4 1/2" | 3 3/8" | 1 3/8" | 2.07 |
| 1 3/4" | 5 1/4" | 4" | 1 5/8" | 3.2 |
| 2" | 6" | 4 1/2" | 1 7/8" | 4.9 |
| 2 7/16" | 7 1/2" | 5 1/4" | 2 3/8" | 9 |
| 2 1/2" | 7" | 5 1/4" | 2 1/8" | 9 |
| 2 13/16" | 8 1/4" | 6 3/8" | 2 5/8" | 13 |
| 3" | 9" | n/a | 2 3/4" | 20 |
| 3 3/16" | 9 1/2" | 7 3/8" | 3" | 20 |
| 4 3/16" | 11 1/2" | 8 1/4" | 3 5/8" | 40 |
| 5 1/4"
6" 7 3/4" |
Data available upon request. Maximum angle is 30¡. |
| Some sizes of bronze, stainless steel and monel metal
universal joints are available.
All fitting work, except boring the ends of the universal joints, is subject to special quoted charge. A full range of 6-spline and square broaches, and some 10-spline broaches are available. |
| Home Page | Atlas U-Joints | Double Atlas U-Joint | Atlas U-Joint Specs. | Vulcan U-Joint | Hinged Gear | Company History | Personnel |